Vertex Standard GX1100S, Руководство по настройке

Страница: 5 / 5

FCC ID:K6630373X3D
IC: 511B-30373X3S
Alignmenmt
5
ˆ
Press the [16/9] key.
ˆ
Press the [ENT] key to save the new setting.
ˆ
Press the [SCAN(MEM)] key to recall the Alignment Item “DSC:xxx(CH70 SQL)”.
ˆ
Set the RF Signal Generator output to 156.525 MHz, at a level of –4dBµ, ±3.0 kHz
deviation with a 1 kHz audio tone.
ˆ
Press the [16/9] key.
ˆ
Press the [ENT] key to save the new setting.
ˆ
Press the [SCAN(MEM)] key to recall the Alignment Item “DC:xxx”.
ˆ
Press the [16/9] key.
ˆ
Press the [ENT] key to save the new setting.
This completes the Software Alignment Mode. To save all settings and exit, press and
hold the [DISTRESS] key for one second. Turn the transceiver’s power off, then
disconnect the Jumper from the TEST points (JP1001).