EVX-539 O
pErating
M
anual
20
a
dvancEd
o
pEratIon
d
IrEct
cH E
ntrY
You can recall the desired channel directly using this
function:
Press, (or press and hold), the assigned
PF
key.
A tone will sound, and the current group/channel
will appear on the display.
Enter the desired group number (two digits) and
channel number (two digits) from the keypad ([
0
]
- [
9
] key).
Press the [
D
] key to store the new setting. The
display indicates “
- SET -
” briefly, then reverts to
the normal channel indication.
You may cancel the new setting by pressing
the [
C
] key. In this case, the display indicates
“
- CANCEL -
” briefly.
s
can
The Scanning feature is used to monitor multiple
signals programmed into the transceiver. While scan-
ning, the transceiver will check each channel for the
presence of a signal, and will stop on a channel if a
signal is present.
EVX-539
can scan both digital and
analog frequency programmed channels simultane-
ously.
To activate scanning:
Press, (or press and hold), the assigned
PF
key to
activate scanning.
The scanner will search the channels of each
channel, looking for active ones; it will pause
each time it finds a channel on which someone is
speaking.
Press again, (or press and hold again), the as-
signed
PF
key to disable scanning. Operation will
revert to the programmed revert channel.
Note
: Your dealer may have programmed your radio
to stay on one of the following channels if you press
the
PTT
switch during scanning pause:
“Scan Pause” channel (“Talk Back”)
“Last Busy” channel
“Priority-2” channel
“User Programmed” channel (“Select Channel”)
The channel which defined in the
CH
Selector
knob.
FCC ID: AXI11154620
IC: 10239A-11154620
