Quick Installation Guide
DG-1 dynamic groove
1. Start Here
Congratulations on your new record player. The DG-1
dynamic groove will provide you with many years of
impeccable performance and help bring you as close to
your music as possible.
Installing and setting up your DG-1 is described in the
following pages predominantly pictorially, however before
the pictures begin, we must ask you to read some statutory
Important Safety Instructions followed by some critical
installation “Do’s and Dont’s”.
Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Do not submerge the equipment in water or liquids.
7. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
EQTPMǻIVWXLEXTVSHYGILIEX
8. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The
wide blade or the third prong are provided for your
WEJIX].JXLITVSZMHIHTPYKHSIWRSXǻXMRXS]SYVSYXPIX
consult an electrician for replacement of the obsolete
outlet.
9. Protect the power cable from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
10. Do not unplug the unit by pulling on the cable, use the
plug.
4RP]YWIEXXEGLQIRXWEGGIWWSVMIWWTIGMǻIHF]XLI
manufacturer.
12. Unplug this apparatus during lightning storms or when
unused for long periods of time.
7IJIVEPPWIVZMGMRKXSUYEPMǻIHWIVZMGITIVWSRRIP
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cable or
plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally,
or has been dropped.
14. The appliance coupler, or the AC Mains plug, is the
AC mains disconnect device and shall remain
readily accessible after installation.
15. Adhere to all applicable, local regulations.
16. Consult a professional engineer when any doubt or
questions arise regarding a physical equipment
installation.
2. Do’s & Don’ts
Please read the following notes carefully, they cover
critically important aspects of your DG-1 installation.
•
Always lift or lower the platter vertically when
removing or replacing it. Do not allow it to tilt.
ƽ
&P[E]WIRWYVIXLI8SRIEVQ8VERWMXGVI[MWǻXXIH
[LIRMRWXEPPMRKEGEVXVMHKI
•
Always ensure the Tonearm Transit Screw is
VIQSZIHFIJSVIYWMRKXLIVIGSVHTPE]IV
ƽ
3IZIVVIQSZIXLI2EMR'IEVMRKTMRHPI
ƽ
3IZIVVIQSZIXLI8SRIEVQJVSQXLI7IGSVH5PE]IV
[LIRǻXXMRKEGEVXVMHKI
ƽ
3IZIVVIQSZIXLI8SRIEVQJVSQXLI7IGSVH5PE]IV
[LIREHNYWXMRKXLIZIVXMGEPXVEGOMRKERKPI:8&
Vertere Limited,
5 Oliver Business Park,
Oliver Road,
London NW10 7JB, UK
8
W: vertereacoustics.com
