1 4
www.versitron.com
FVxM4CCx
TROUBLESHOOTING
Optical Fiber
The VERSITRON
VersiVision
FVTM4CCx and FVRM4CCx
Series is available with most
applications using multi-mode or single-mode optical fibers. Please be certain that the correct
size and type of the fiber is being used for the particular mode transmitter/receiver combination.
Also be certain that the attenuation and bandwidth of the fiber optic cable being used is within
the range of the system’s loss budget specifications.
General
Any dirt or dust may easily pollute or block the fiber from accepting or radiating light.
Therefore, please try to keep the optical connector clear and always use the dust caps whenever
the connector is exposed to air. It is suggested that the tip of the optical connected should be
carefully cleaned with a lint-free cloth moistened with alcohol from time to time.
The status of any of the VIDEO LED should provide the first clue as to the origin of any
operational failure. If the VIDEO LED on the receiver unit is off, it usually means that the f iber
is broken or has too much attenuation.
Please also make sure that the transmitter and the receiver are not used in opposite position
If the system is still not working after examining the above possibilities, please contact our
Customer Service Department for further assistance
Data Link
Even when installed exactly as directed, it is possible that the data/audio function may fail to
operate properly. If this problem occurs, first please check the data cable, and then check
whether the data cable connector is firmly inserted into the RJ-45 port.
If the system is still not working after examining the above possibilities, please contact our
Customer Service Department for further assistance.
