-20-
VERSITRON
SF71060M & SF71060MP
Revision A3
2.10 Making Fiber Connection
The dual-speed SFP slots, Port 9 and Port 10 must be populated with a fiber optic SFP module for making fiber
connections.
Types of fiber optic SFP module supported:
1000Mbps based 1000BASE-X
100Mbps based 100BASE-FX
Installing the fiber optic SFP module:
1.
Turn off the power to the switch.
2.
Insert the fiber optic SFP module into the SFP slot until the module securely seated slot and place
the bail in lock position.
Connecting Fiber Cables
LC connectors are commonly equipped on most fiber optic SFP modules. Identify TX and RX
connector before making cable connection. The following figure illustrates a connection example
between two fiber ports:
Make sure the Rx-to-Tx connection rule is followed on the both ends of the fiber cable.
