VL-MPEu-C1E Hardware Reference Manual
5
Introduction
Description
F
EATURES AND
C
ONSTRUCTION
The VL-MPEu-C1E is an extremely small and rugged module designed to connect to a Controller
Area Network. This industry-standard Mini PCIe module provides an easy and economical way
to add a twin CAN FD interface to an embedded computer system. The module is also backward
compatible with CAN 2.0 A and CAN 2.0 B protocols.
The VL-MPEu-C1E supports two CAN channels using a 2 mm 6-pin Molex MicroClasp
connector for a secure connection. Accessory cables are available for conversion to other
connector types.
The module features a wide operating temperature range (-40° to +85°C) and it is designed to be
rugged and robust for use in industrial and military applications.
The VL-MPEu-C1E supports a wide range of CAN functionality including: message acceptance
filter and listen-only mode. The module supports the CANopen higher layer protocol.
The VL-MPEu-C1E module is compatible with a variety of popular operating systems including
Windows and Linux.
T
ECHNICAL
S
PECIFICATIONS
Specifications are subject to change without notification.
General Specifications
Board Size:
30 mm x 52.55 mm x 10.18 mm
Storage Temperature:
-40° to +85°C
Operating Temperature:
-40° to +85°C
Power Requirements:
… 3.3V @ 66mA (0.22W)
Software:
Compatible with most x86 operating systems
including Windows*, Windows Embedded, and Linux
CAN Interface:
2 channels, supporting CAN-FD or CAN
2.0 networks.
•
Galvanically isolated (2.5 kV rated).
•
ISO11898 compliant.
Mini PCIe Signal Type:
PCI Express Gen 1 and Gen 2
Signaling:
Supports 11-bit as well as 29-bit identifiers.
CAN 2.0B – Support baud rate:
•
100/125/250/500(default)/800/1000K.
•
CAN-FD – Support above baud rates and up to
CAN-FD max (5 Mbps)
1
1
