background image

iii 

VL-EPU-4011 BIOS Reference Manual 

 

Product Revision Notes 

Revision 1.0 

Initial draft 

 

Support Page 

The 

Harrier Product  Page

 contains additional information and resources for this product including: 

 

Operating system information and software drivers 

 

Data sheets and manufacturers links for chips used in this product 

 

BIOS information and upgrades 

 

Customer Support 

If you are unable to solve a problem after reading this manual, visiting the product support page or contact 
VersaLogic Technical Support at (503) 747-2261. VersaLogic support engineers are also available via e-
mail at [email protected]. 

Repair Service 

If your product requires service, you must obtain a Returned Material Authorization (RMA) number by 
calling 503-747-2261. Be ready to provide the following information: 

 

Your name, the name of your company, your phone number, and e-mail address 

 

The name of a technician or engineer that can be contacted if any questions arise 

 

The quantity of items being returned 

 

The model and serial number (barcode) of each item 

 

A detailed description of the problem 

 

Steps you have taken to resolve or recreate the problem 

 

The return shipping address 

AS9100 

All AS9100 products dispositioned for scrap shall be conspicuously and permanently marked, or 

positively controlled, until physically rendered unusable.  

Material designated for scrap may be recycled in a manner that complies with applicable environmental 
regulations. 

Note:

 VersaLogic recommends that all materials be disposed of in environmentally responsible manner i.e., 

recycling in compliance with applicable laws and regulations. 

Warranty Repair

 

All parts and labor charges are covered, including return shipping charges for 

FedEx Ground delivery to United States addresses.

 

Non-warranty Repair 

All approved non-warranty repairs are subject to diagnosis and labor charges, 
parts charges and return shipping fees. Specify the shipping method you 
prefer and provide a purchase order number for invoicing the repair.

 

 

Note:

 

 

Mark the RMA number provided by VersaLogic clearly on the outside of the box before returning. 

Содержание VL-EPU-4011


























































































Отзывы: