VersaLogic VL-EPM-E2, Справочное руководство

Страница: 14 / 16

Distributor of VersaLogic Corporation: Excellent Integrated System Limited
Datasheet of VL-EPM-E2A - PC/104-PLUS, ET, 10/100, 1 PORT
Contact us: sales@integrated-circuit.com Website: www.integrated-circuit.com
VL-EPM-E2 Reference Manual
9
Interfaces and Connectors
Ethernet
The Ethernet interface, based on a Micrel KSZ8441-PQML controller, provides a standard
10baseT and 100baseTX network interface. Software drivers are available for a wide variety of
operating systems to provide a complete high-performance networking solution. The Ethernet
controller features both Auto-Negotiation and automatic MDI/MDI-X cable crossover detection.
Table 3: VL-EPM-E2 Ethernet Connector (J1 and J2) Pinout
Models A and B
1
J1/J2
Pin
Signal
Name
Function
1 TD+ Transmit Data Positive
2 TD– Transmit Data Negative
3 RD+ Receive Data Positive
4 GND Isolated Ground
2
5 GND Isolated Ground
6 RD– Receive Data Negative
7 GND Isolated Ground
8 GND Isolated Ground
Table 4: VL-EPM-E2 Ethernet Connector (J3 and J4) Pinout
Model D
1
J3/J4
Pin
Signal
Name
Function
1 GND Isolated Ground
2 GND Isolated Ground
3 RD– Receive Data Negative
4 RD+ Receive Data Positive
5 GND Isolated Ground
6 GND Isolated Ground
7 TD– Transmit Data Negative
8 TD+ Transmit Data Positive
1. Tables show the MDI default pinout. The Tx
and Rx pairs reverse when the controller
switches to MDI-X mode.
2. Ground pins isolated to reduce EMI.
5 3
14 / 16
14 / 16