VX-200M-X3
Industrial Micro 1000Base-T to 1000Base SFP Ethernet Media Converter
5224 Bell Court
Chino, CA 91710
www.versatek.com
USA: 800-989-2797
Worldwide: 909-591-8891
Fax: 909-591-6962
VX-200M-X3 is a micro media converter that supports external SFP modules and meets EN55022. It is an
industrial product whose operating temperature range is -10°C to 60°C. VX-200M-X3 supports 1000M Ethernet
port and 1000M SFP port. The Ethernet port supports both half-duplex and full-duplex mode. VX-200M-X3 is the
same at the transmitter or receiver sides. Users can use different type of SFP modules (single-mode/multi-mode
fiber, 1/2 core) as needed.The sleek design of the micro media converter occupies limited space and it's an ideal
solution for easy installation within most camera housings.
Disclaimer:
To ensure trouble free transportation and storage, all Versa Technology products must be thoroughly inspected,
tested and properly packed before delivery. Check the product upon receipt for any visible damage, which may
have been caused during shipment.
Package Content
•
VX-200M-X3 Media Converter x 1
•
Power Adapter x 1
•
Quick Start Guide x 1
Quick Start Guide
This quick start guide describes how to install and use the Industrial Media Converter.
This is the Media Converter of choice for harsh environments constrained by space.
PWR
1000
LINK/
ACT
LED
Green
Off
Green
Green
Off
Steady
Flashing
Power on
Power off
TX and RX Fiber link stable
1000Base-TX
Network not connected
A valid network connection established
Transmitting or receiving data
ACT stands for Activity
State
Indication
Physical Description
Front/Rear Panel
SPD
Power Connection
12VDC
- GND
+ 12V
Terminal Block
- +
1000M Ethernet Media Converter
1000
FX LINK PWR
SFP
LINK/ACT
DC
12V
SPD
1000
+
-
Overview
The Port Status LEDs
