2
Here is the general procedure to follow when using the Exercise Heart Rate Monitor:
1. Connect the Exercise Heart Rate Monitor to the interface.
2. Start the data-collection software.
3. The software will identify the Exercise Heart Rate Monitor and load a default
data-collection setup. You are now ready to collect data.
Data-Collection Software
This sensor can be used with an interface and the following data-collection software.
•
Logger Pro 3
This computer program is used with LabQuest 2, LabQuest,
LabQuest Mini, LabPro, or Go!Link.
•
Logger Pro 2
This computer program is used with ULI or Serial Box Interface.
•
Logger Lite
This computer program is used with LabQuest 2, LabQuest,
LabQuest Mini, LabPro, or Go!Link.
•
LabQuest App
This program is used when LabQuest 2 or LabQuest is used as a
standalone device.
•
DataQuest™ Software for TI-Nspire™
This calculator application for the
TI-Nspire can be used with the EasyLink or TI-Nspire Lab Cradle.
•
EasyData App
This calculator application for the TI-83 Plus and TI-84 Plus can
be used with CBL 2, LabPro, and Vernier EasyLink. We recommend version 2.0
or newer, which can be downloaded from the Vernier web site,
www.vernier.com/easy/easydata.html, and then transferred to the calculator. See
the Vernier web site, www.vernier.com/calc/software/index.html for more
information on the App and Program Transfer Guidebook.
•
DataMate program
Use DataMate with LabPro or CBL 2 and TI-73, TI-83,
TI-84, TI-86, TI-89, and Voyage 200 calculators. See the LabPro and CBL 2
Guidebooks for instructions on transferring DataMate to the calculator.
•
LabVIEW
National Instruments LabVIEW™ software is a graphical
programming language sold by National Instruments. It is used with SensorDAQ
and can be used with a number of other Vernier interfaces. See
www.vernier.com/labview for more information.
NOTE:
Vernier products are designed for educational use. Our products are not
designed nor recommended for any industrial, medical, or commercial process such
as life support, patient diagnosis, control of a manufacturing process, or industrial
testing of any kind.
Specifications
Receiver range:
80–100 cm
Receiver current consumption:
30–55 µA
Transmitter transmission frequency:
5 kHz ±10%
Transmitter operating temperature:
0–
60˚C
1
If you are using Logger
Pro
2 with either a ULI or SBI, the sensor will not auto-ID.
Open an experiment file for the Exercise Heart Rate Monitor in the Probes &
Sensors folder.
