16
50004825
VM508K / VM658K Assembly
CAUTION: Some parts may have sharp edges; to avoid injury, wearing gloves during assembly, lifting or
moving the grill is recommended.
Step 19: Attach Knobs
(If not installed)
Parts Required:
VM508K: (5) Knobs
VM658K: (6) Knobs
Figure 19
NOTE:
Depending on your model, your grill may
require 5 or 6 knobs. VM508 is equipped with five
(5) knobs. VM658 is equipped with six (6) knobs.
Align the knobs on the valve stems and push in-
ward until the knob sits snugly on the stem.
����
������������
����
Figure 19
B177
Step 18: Attach Side Burner Assembly
Follow Side Burner Assembly Instructions to assemble side burner to unit.
Step 20: Install the Battery
NOTE:
Requires one (1) “AA” battery. (supplied)
Figure 20
Unscrew the ignition button from the console and in-
sert the appropriate battery into the housing by plac-
ing the positive side of the battery first. Then screw
the ignition button back into the console.
Check for sparks under each main burner before
proceeding.
�
�
����
���������������
����
Figure 20
B178
Step 21: Install the Backlighting Batteries
NOTE:
Eight (8) “AA” batteries are required for all grill models.
(Not included)
Figure 21
Remove the battery case from the battery holder. Insert the
eight (8) “AA” batteries. Attach battery case to back light wire
connection. Reinstall battery case in battery holder with back
light connector on the top.
WARNING:
Replacing the battery incorrectly might result in an
explosion. Replace the battery only with the same or equivalent
type recommended by the manufacturer. Dispose of used bat-
teries according to your local environmental guidelines.
����
������������
�����
Battery
Case
B245
Figure 21
Battery Shroud
