Page 2
VC3505 ASSEMBLY
Step 2: Position main grill head.
Required:
Main Grill Unit.
Carefully lay the main grill unit on its back, using
the flattened cardboard sleeve as a protective surface.
This operation is best performed by two (2) people.
Use of gloves is recommended.
Ensure the front lid does not fall open while moving the unit.
Allow the lid to rest partially open once the unit is on its back (Fig. 1).
Fig. 2
Step 3: Assemble legs to bottom panel.
Required:
(4) legs; Bottom Panel; (8) 1/4-20 x 1
¹⁄₂
” bolts
Assemble the four (4) legs to the bottom panel as shown,
with two (2) bolts each. Make sure the caster insert (Part
#50002534) is fully engaged into each leg. Tighten fully
(Fig. 2).
fig3b
Step 1: Unpack carton.
Tools Required:
Knife or scissors; hammer; #3 (Large) Philips or Robertson screwdriver
Use the knife or scissors to cut the strapping on the package.
Remove the cardboard sleeve by lifting it straight over top of the barbecue. Remove and unpack the en-
closed parts boxes. Carefully remove any protective covering from stainless steel parts.
CAUTION:
Some parts have sharp edges - gloves are recommended when handling and assembling parts.
Fig. 1
fig2
