12
VCG Biltmore Series • SB100 • 4013-303 Installers Manual • Rev A • 02/19/15
Figure 3.5 Unpack Back Refractory
Figure 3.6 Bend Refractory Brackets Back Down
D. Unpack the Refractory & Fireplace
• Remove back refractory from outside of fireplace by
bending tabs up and lifting refractory out of brackets.
See Figure 3.5.
• Bend tabs back down out of the way. See Figure 3.6.
• Do not remove screws or refractory brackets from
fireplace. If refractory brackets must be removed, fill
holes in outer shell with screws.
• Repeat this process to remove side refractories.
Figure 3.8 Shipping Spacers
Figure 3.7 Remove Screen Rods
•
Remove hearth stone by removing three corrugated
shipping spacers (Figure 3.8). Lift hearth stone out of
fireplace. See Figure 3.9.
Figure 3.9 Lifting Out Hearth Stone
• Remove screens by removing screw from end of each
screen rod.
Figure 3.10 Removing Shipping Brackets
• Remove fireplace from pallet:
- Remove screws from shipping brackets and pallet
(Figure 3.10),
- Replace screws removed from fireplace.
- Brackets can be used to anchor fireplace in position.
