Trigo S
2019-02
Using your wheelchair
12
EN
NL
PL
CS
Fixing knob
1. Turn the push handle knob (30) a few turns anticlockwise.
2. Move the push handle up/down to the desired height.
3. Secure the handle by tightening the knob; turn it clockwise.
4. Repeat for the other side. Make sure that both sides are set
to the same height and that they are firmly secured.
3.7
Moving to/from your wheelchair
Risk of injuries and damage
•
In case you cannot perform the transfer in a safe manner, ask someone to assist you.
•
Do not stand on the footplate during transfer into or out of the wheelchair.
Transfer
1. Position the wheelchair as close as possible to you when sitting in your chair, couch,
seat or bed.
1. Apply both parking brakes to block the movement, see §3.1.
2. If possible, fold the open footplate upwards to prevent standing on it.
3. Transfer to/from the wheelchair using the strength of your arms or with the help of
attendant(s) or lifting equipment.
Sitting in the wheelchair
1. Sit down on the seat with your lower back against the backrest.
2. If applicable, fold the open footplate down and put your feet on the footplate.
3.8
Riding
Risk of injuries and damage
•
Before every usage, make sure that:
o
parking brakes are working properly.
o
tires are in good condition, see §4.
•
Prevent your fingers from being caught by the wheel spokes.
•
Do not operate the hand rims with wet hands.
•
Prevent entrapment of your hands on the hand rims when you pass small passages.
•
Do NOT drive on slopes, obstacles, steps or kerbs larger than specified in §5.
•
When you stop on a (small) slope, use your brakes.
•
Make sure all four wheels touch the ground while riding up or down a slope.
•
Take slopes as slow as possible.
•
Always stay on the pavement when riding on public roads.
•
Pay attention if the road has holes or gaps that may cause entrapment of the wheels.
•
Avoid stones and other objects that may block the wheels.
CAUTION
CAUTION
30