Vermeiren Mercurius 4 LTD, Инструкция по эксплуатации

Страница: 13 / 184

Mercurius 4 LTD
2020-10
Using your scooter
9
EN
NL
3.2.3 Setting
Press to change mode, to modify time and display.
Normal AM/PM hour minute Temp °C/°F
(speed) kmh/mph, (distance) km/mile Normal
Vermeiren is responsible for the changes in the software.Contact your dealer or Vermeiren for
questions or updates.
3.2.4 Operating the brakes
To apply the electromagnetic brakes:
1. Let go of the speed lever. The electromagnetic brake in the motor will be activated, the
scooter will stop.
To apply the manual brakes (optional) - emergency brake:
1. Pull the brake lever (1) towards the handgrip.
2. Release the brake lever.
To apply the manual brakes (optional) - parking brake:
1. Pull the brake lever (1) towards the handgrip and use
the button to lock it.
2. Squeeze the brake lever again to release the button.
The manual brake tightness can be adjusted with the brake
cable adjuster.
3.2.5 Driving the scooter
Risk of injuries

Do not use both sides of the speed lever simultaneously. This might leave you unable to control
your scooter.
Move the speed lever in the required direction:
PULL ACTION BY THE RIGHT HAND = FORWARD MOVEMENT
PULL ACTION BY THE LEFT HAND = BACKWARD MOVEMENT
Pulling the lever more will increase the speed within the selected speed setting. Only use higher
speed settings when you are confident that you can easily operate and control your scooter.
When you switch on the scooter, wait for 3 seconds before pulling the speed lever. Otherwise,
the horn will sound as a warning and the scooter will not move. If this is the case, switch OFF the
scooter and switch ON again.
3.2.6 Braking
To brake, let go of the speed lever. It will return to the neutral position and slow down your scooter
to a gentle stop. Practice pulling away and braking to get accustomed to the scooter. You need
to be able to estimate how your scooter will react when you drive or brake.
SET (3 sec) SET SET
SET
SET SET
WARNING