Goliat
2019-03
Assembly/disassembly and adjustments
5
EN
NL
4.1.3
Mounting the storage bag
Risk of falling or
tipping over
Do not overload the storage bag.
The maximum carrying weight of the
storage bag can be found in §7.
The storage bag is meant to be mounted
below the seat, on the two horizontal
tubes on which the seat rests.
1.
Fold the seat (8) open.
2.
Mount the storage bag on the frame
tubes with the five snap fasteners (9).
3.
Fold the seat down again.
4.1.4
Mounting/Removing the backrest
Removing
1.
Turn the locks on both sides of the
backrest to “open” position [A] by
turning the lever (10).
2.
Slide the backrest upwards and
remove.
Mounting
1.
Make sure that the locks on both sides
of the backrest are placed to “open”
position [A].
2.
Slide the backrest sides on the support
(11), as far down as possible.
3.
Adjust the locks on both sides of the
backrest to “lock” position [B] by
turning the lever (10). Make sure that
the backrest is well secured into
position before sitting down!
4.2
Disassembly
Risk of damage
Pay attention to the position of the brake
cables. Don’t pull the
handgrips too high
to prevent damage to the brake cable.
The disassembly of the rollator is
conducted in reverse order to the
assembly:
1.
Storage bag: Open snap fasteners (9)
and remove the bag.
2.
Cable clamp (7) (2x): Carefully pull from
the frame tube.
3.
Handgrip with brake lever (2x): Press
and hold the spring button (5), and pull
the handgrip out of the frame.
4.
Front and rear wheels (4x): Press and
hold the spring button (1), and pull the
wheel out of the frame.
CAUTION
CAUTION
8
9
11
10
10
Содержание Goliat
Страница 4: ...This page is intentionally left blank ...
Страница 14: ......
Страница 34: ......
Страница 74: ......