Eclips X4 kids 90°
2014-08
Page 18
3.10 Adjusting of the handgrips
L
WARNING:
Risk of injury - Make sure that all screws are properly tightened with
the appropriate tool.
L
WARNING:
Risk of tipping over - Make sure that the tubes of the handgrips are
positioned identically on both sides.
With the model Eclips X4 kids 90° you can adjust
the height of the handgrips
in back tube
.
1. Loosen the star knob
.
2. Set the handgrips to the required height (6
different positions: steps of 30 mm.)
3. Retighten the star knob
again.
The back cushion is not adjustable in different
heights. The back height (BH: 300 mm, 350 mm,
400 mm) must be indicated when ordered.
3.11 Adjusting of the tip cap
L
WARNING:
Risk of injury - Make sure that all screws are properly tightened with
the appropriate tool.
A tip cap is mounted on the lower back frame that can be adjusted in its height depending on
the seat height of the wheelchair.
The tip cap can be placed in 2 different position with a difference of 15 mm.
1.
Remove the screws
Ⓑ
.
2.
Adjust the height of the tip cap to a
comfortable position.
Tip cap height
Tube tip cap
Ⓐ
Tube frame
Ⓒ
115 mm
(Standard)
Hole 1 and 3
Hole 1 and 3
130 mm
Hole 1 and 3
Hole 2 and 4
Table
3:
Tip
cap
heights
for
wheelchair
with
seat
height
of
420
mm
3.
Tighten the screws properly
Ⓑ
.
(Fig C)
If an anti-tipping is installed, it replaces the addition of the tip cap and can be used
accordingly.
Содержание Eclips X4 90
Страница 1: ...VERMEIREN Eclips X4 kids 90 I N S T R U C T I O N M A N U A L ...
Страница 23: ......
