Introduction
Sensor overview
LED Behavior
Test mode
To enable test mode, press the top button. While in test mode, the green LED will:
●
turn on when the sensor is separated from the magnet (door opened).
●
turn off when the sensor is brought close to the magnet (door closed).
After ten minutes in test mode, the device will return to normal operation.
Normal operation
While in normal operation, the green LED will:
●
NOT turn on when the sensor is separated form the magnet.
●
flash rapidly three times every two minutes to indicate low battery.
Verkada Inc. 405 E 4th Ave, San Mateo, CA 94401
All specifications are subject to change without notice
Copyright © Verkada Inc. All rights reserved.
Test mode button
Status LED
(Glow-though)
Sensor Module
Sensor Mount
Magnet mount
and cover
4