USB720 Modem USER GUIDE
6
Installation and Configuration
This section will guide you through the hardware installation and setup process for the USB720 Modem. Before you
begin using your device, read through this Hardware Manual to become familiar with the documentation that came
with your USB720 Modem.
Basics
Follow these steps to begin using your USB720 Modem:
1. Turn on your computing device and close all applications.
2. Insert the VZAccess Manager CD-ROM into your computer’s CD drive.
3. If the VZAccess Manager CD does not automatically launch, manually launch the VZAccess Manager CD
following the guidelines outlined for manual CD launch per the operating system of your computing device.
Instructions for manual CD launch may be found in the User Guide or Help features of your computing
device.
4. Install VZAccess Manager as outlined in the Quick Reference Guide.
5. Insert the USB720 Modem to install the necessary drivers.
6. Launch VZAccess Manager, and click on the
Connect
button. If your device was activated prior to
installation of VZAccess Manager and you are in a broadband coverage area, you will be connected to the
Verizon Wireless network. If your device was not activated prior to installation of VZAccess Manager, the
software will connect to the Verizon Wireless activation website. Follow the on-screen instructions to
complete the activation. Refer to the VZAccess Manager User Guide, located on the Installation CD for
more detailed instructions.
Important:
Installation must be performed within a Broadband
Access-
Rev A/O and/or National
Access
coverage area.
Important:
Before installing your new software, delete or uninstall any previously existing modem or dialer
software from your computing system.
Important:
VZAccess Manager must be installed before you plug the USB720 Modem into the computing device
for the first time. Only after the software has been installed can the operating system successfully install and
configure the USB720 Modem
.
