Verizon One Talk T53W, Руководство пользователя

Страница: 3 / 5

3
User guide
Starting the phone
After the One Talk phone is connected to a network and
supplied with power, it will automatically begin the initialization
process. The phone will go through a series of screens and
update the firmware on the device; the first-time setup process
takes about 15 minutes and should not be interrupted. You will
know the phone is ready to be used when the 911 address
appears in the screen of the device.
Basic call functions
Placing a call
Using the handset:
1. Pick up the handset
2. Enter the number, and then press
Send
Using the speakerphone:
1. With the handset on-hook, press
2. Enter the number, and then press
Send
Using the headset:
1. With the headset connected, press to activate the
headset mode
2. Enter the number, and then press
Send
Note: During a call, you can alternate between the headset,
hands-free speakerphone and handset modes by pressing
the
Headset key, the Speakerphone key or by picking up the
handset. Headset mode requires a connected headset.
Answering a call
Using the handset:
Pick up the handset.
Using the speakerphone:
Press .
Using the headset:
Press .
Note: You can reject an incoming call by pressing Reject.
Ending a call
Using the handset:
Hang up the handset or press End Call .
Using the speakerphone:
Press or
End Call
.
Using the headset:
Press End call .
Redialing a call
• Press to enter the Placed Calls list, press or
to select the desired entry, and then press or Send
• Press twice when the phone is idle to dial out the last
dialed number Redialing a Call
Muting and unmuting a call
• Press to mute the microphone during a call
• Press again to unmute the call
Holding and resuming a call
To hold a call:
Press Hold during an active call.
To resume the call, do one of the following:
• If there is only one call on hold, press Resume
• If there is more than one call on hold, press or to
select the desired call, and then press Resume
Transferring a call
You can transfer a call in the following ways:
Direct transfer
1. Press the
Direct
soft key during an active call. The call is
placed on hold
2. Enter the number you want to transfer to
3. Press the
Direct
soft key
Consultative transfer
1. Press the
Consult
soft key during an active call. The call is
placed on hold
2. Enter the number you want to transfer to, and then
press
3. Press the Consult soft key when you hear the
ringback tone