background image

82

 

LTE

 — Long Term Evolution. A wireless broadband technology designed to support roaming Internet 

access via cell phones and handheld devices. Because LTE offers significant improvements over older 
cellular communication standards, some refer to it as a 4G (fourth generation) technology along with 
WiMax.

 

MAC Address

 — Media Access Control. A number that uniquely identifies each network hardware 

device. MAC addresses are 12-digit hexadecimal numbers. This is also known as the physical or 
hardware address.

 

Mbps

 — Megabits per second.

 

MSID 

— Mobile Station IDentifier. A number for a mobile phone that identifies that phone to the 

network. These numbers are carrier specific.

 

Network Operator

   — The vendor who provides your wireless access. Known by different names in 

different regions, some examples are: wireless provider, network provider, and service provider.

 

Network Technology

  — The technology on which a particular network provider’s system is built; such 

as CDMA or EVDO.

 

Port

 — A virtual data connection used by programs to exchange data. It is the endpoint in a logical 

connection. The port is specified by the port number.

 

Port Forwarding

 — A process that allows remote devices to connect to a specific computer within a 

private LAN.

 

Port Number

 —  A 16-bit number used by the TCP and UDP protocols to direct traffic on a TCP/IP 

host. Certain port numbers are standard for common applications.

 

PRL

 — Preferred Roaming List. A list that your wireless phone or device uses to determine which 

networks to connect with when you are roaming. (Network operator specific).

 

Protocol

 — A standard that enables connection, communication, and data transfer between 

computing endpoints.

 

Proxy

 — A firewall mechanism that replaces the IP address of a host on the internal (protected) 

network with its own IP address for all traffic passing through it. 

 

Rev A

  — CDMA EV-DO Rev. A is a leading-edge wireless technology with higher data rates and higher 

system capacity. It is a fully backward compatible standard and remains interoperable with deployed 
EV-DO networks and devices around the world. The increased data rates on Rev. A’s physical layer 
enable richer applications and services. For more information, visit 

www.cdg.org

 

Router

 — A device that directs traffic from one network to another.

 

SIM

 — Subscriber Identification Module. Found in GSM network technology, the SIM is a card 

containing identification information for the subscriber and their account. The SIM card can be moved 
to different devices.

 

SSID

 — Service Set IDentifier. The name assigned to a WiFi network.

 

TCP/IP

 — Transmission Control Protocol/Internet Protocol.  The set of communications protocols used 

for the Internet and other similar networks.

 

USB

 — Universal Serial Bus. A connection type for computing device peripherals such as a printer, 

mobile modem, etc. USB connectors may be used for data transfer or charging.

Содержание Jetpack MiFi 4510L

























































































Отзывы: