background image

Interfaces & buttons 

Interfaces 

Description 

Data 

The “Data” port on the MoCA Ethernet Adapter is for connection 
to your existing Coaxial network. 

DC Port 

Connect the supplied 12V, 1A power adapter to this port to power 
on the device. 

Reset 

If you experience difficulties with your device or want to revert all 
settings that you have changed, the reset button allows you to 
reset the device back to its factory default state. A single quick 
press and release the reset button restart the device. Press and 
hold the reset button for 10 seconds to restore the factory default 
settings. 

2.5G RJ-45 Port 

The 2.5G RJ-45 port creates an interface to connect an Ethernet 
device via your MoCA network. 

1G RJ-45 Port 

The 1G RJ-45 ports provide 1Gbps Ethernet connection for 
Ethernet enabled devices via your MoCA network. 

LEDs 

The LEDs indicate the system and Ethernet connection status of the MoCA Ethernet Adapter. 

Indicator/ Scenario 

Description 

Light

 

type

 

System 

System off

 

Off

 

Power on 

Yellow 

MoCA network connected 

White 

MoCA traffic

 

Blinking White 

RJ45 

10/100M connection speed 

Yellow 

1G/2.5G connection speed 

White 

10/100M connect (traffic)

 

Blinking Yellow 

1G/2.5G connect (traffic)

 

Blinking White 

Содержание ASK-MAE340

























Отзывы: