13
NOTE:
Connect up to five Wi-Fi–enabled devices at once.
Plug the device directly into a wall outlet or laptop USB port to extend usage time.
Setting up the Fivespot for the First Time
VZ
Access Manager must be installed prior to activation of your device. The first time you use the
device,
VZ
Access Manager must be installed.
VZ
Access Manager installation
Getting started with your new wireless device is simple. All you have to do is connect your device to a USB port on your
notebook computer using the USB cable included with your device. VZAccess Manager Installer auto-launches and the drivers
install automatically once installation is complete. And with the new VZAccess Manager software automatically included with
your installation, you’ll find that your wireless device is just as easy to use as it is to install.
In most operating systems, VZAccess Manager will launch automatically on your screen once the software is properly installed. (If VZAccess Manager does not open automatically,
you can launch it from your Start menu. Refer to software User Guide for complete details.)
Install
VZ
Access Manager and drivers with the USB cable before installation
IMPORTANT:
Installation must be performed via the USB cable prior to activation.
IMPORTANT:
Before installing your new software, uninstall any previous version of
VZ
Access Manager and drivers using the
proper Add/Remove Programs steps per your operating system.
Windows
1.
Turn on your computer and close all open applications. Make sure your Fivespot is off.
2.
Insert the USB cable into the Mini USB port on your device and the other end into the USB port of your computer.
3.
To turn your Fivespot on, press and hold the Power button until the signal icon is lit.
VZAccess Manager Installer launches and the device drivers automatically install (this may take a few moments). If VZAccess