Verity Systems SM07C, Руководство пользователя

Страница: 4 / 16

Think Safety
Read our manual before operating
or installing.
Most likely, your system came preinstalled so the
installation section would be for reference.
Thank you for your purchase of our Verity RVS®. When
installed and used properly, your SM07C is designed to
deliver you years of trouble-free operation. This manual
contains important information required to properly install
and operate the unit. Verity RVS units are designed for
quick installation by trained professionals in proper
installation environments. Our designs are based on
decades of working with vehicle manufacturers.
Verity RVS products are intended to be installed as a
supplement and our observation systems and/or products
are not intended for use as substitutes for rear-view mirror
devices, or for any other standard motor vehicle equipment
which may be required to be installed on vehicles by law.
Verity RVS products promote improving the vehicle
operator’s field of view. Our products are no substitute for
proper defensive driving techniques, observance of traffic
laws, and motor vehicle safety regulations.
Installation Location
It is unlawful in most locals for any person to drive a motor
vehicle equipped with a television viewer/screen located at
any point forward of the back of the driver’s seat (or in any
location that is visible, directly or indirectly) to the driver
while operating the vehicle. Our systems are designed to
be used primarily as a rear observation device.
DO NOT OPEN ANY COMPONENT. There are no
serviceable parts inside any of the components of the
Verity RVS. Opening the product will break the tamper
indicators and void the warranty. Contact our tech support
if a problem should arise 574-807-6002. For faster
response, fill out a service ticket found on our website.
www.verityrvs.com