Verity Audio Sarasto, Руководство пользователя

Страница: 3 / 11

SARASTRO OWNER’S MANUAL
R.5.0 March 2005
VERITY AUDIO PAGE 3
Safety Instructions
In these safety instructions, the word "product" refers to the
Verity Audio Sarastro and all its accessories.
1 Read Instructions — All the safety and operating
instructions should be read before the product is operated;
2 Retain Instructions — The safety and operating
instructions should be retained for future reference;
3 Head Warnings — All warnings on the product and
in the owner's manual should be followed;
4 Follow Instructions — All operating and maintenance
instructions should be followed;
5 Cleaning — Unplug the product and clean it with a
damp cloth. Do not use a liquid or aerosol cleaner, or a
magnetic/static cleaning device. The product should be
cleaned only as recommended in this manual;
6 Accessories — Do not use accessories unless
recommended in this manual. Do not connect or play the
product before making certain that the associated
accessories are in good condition;
7 Heat — Avoid placing this product near a heat
source;
8 Placing or moving — Do not place on an unstable
cart, stand, tripod, bracket, or table. The product may fall
causing serious injuries, and serious damage to the
product. A product with cart combination should be
moved with care. Quick stops, excessive force, and
uneven surfaces may cause the product cart combination
to overturn; The upper module is not attached to the
lower module. It holds by gravity and with the help of
cushion pads. Attempting to move the product without
removing the upper module could cause the later to fall
and result in serious injuries. Before moving your product,
always remove the upper module;
9 Power amplifier — Hazard of electric shock — Do
not manipulate, move, clean or disconnect your product
while your power amplifier is turned on;
10 Spikes — The underneath spikes assure a tight
coupling with the floor. They are razor-sharp and must be
manipulated with extreme care. Do not move the product
while the spikes are installed. The spikes should be
removed before moving the produit;
11 Moving when Packed — The product comes packed
in four ATA flight cases. These cases are HEAVY and
cannot be carried by a single person. Attempting to move
a transportation case alone could cause serious injuries;
12 Input power — To reduce the risk of fire or electric
shock, do not allow an input power over 500 watts RMS
(45 volts) to the produit;
13 Unpacking and Packing Instructions — The product
should be unpacked and / or packed only as indicated in
this manual;
14 Tweeter air exposure — The pure aluminum ribbon
is very sensitive to air flow. Never blow or suck air close
or at the tweeter nor expose the tweeter to an air draft;
15 Object and Liquid Entry — Do not expose the
product to liquid or moisture, or spill liquids on or near it.
Do not place the product on a wet surface. Never put
objects of any kind into the product openings, as they may
touch dangerous voltage points or cause short-circuits that
could result in a fire or electric stock;
16 Servicing — Do not attempt to service this product
yourself. Refer all servicing to qualified service personnel;
17 Damage Requiring Service — Turn off your power
amplifier(s) and disconnect all cables from this product,
and refer servicing to qualified service personnel under
the following conditions:When the product exhibits a
distinct change in performance. This indicates the need for
service;If any liquid has been spilled into, or objects have
fallen into, the product;If the product has been exposed to
rain or water;If the product does not operate normally
even if you follow the operating instructions. Connect
only your product as recommended in your owner's
manual. Improper connections may result in damage and
will often require extensive work by a qualified technician
to restore the product to its normal operation;If the
product has been dropped or the cabinet has been
damage;
18 Replacement Parts — When replacement parts are
required, be sure the service technician has used original
replacement parts from Verity Audio. Unauthorized
substitution may result in poor performance, fire, electric
shock or other hasards;
19 Safety Check — Upon completion of any service or
repairs to this product, ask the service technician to
perform safety checks to determine that the product is in
safe operating order;