OTELLO
R2.0
OWNER’S MANUAL
June 2020
VERITY AUDIO
PAGE 8
Troubleshooting
This section describes how to solve common problems you may en-
counter when using your loudspeakers. Many problems have simple
solutions, so try these suggestions before you call your dealer or Verity
Audio support (see the Maintenance section of this manual).
This section contains problems and solutions related to the operation
of your hardware. Try the solutions in the order listed within each sec-
tion.
OPERATIONAL PROBLEMS
Make sure:
1. all your audio apparatuses are plugged into a power source and
turned on. Their respective power light indicators should be on;
2. every interconnect cable is connected properly and firmly;
3. every interconnect cable conduct signal normally;
4. your audio equipment selectors and controls are suitably adjusted
(source selector, volume control(s), mute selector, etc.);
5. your software (CD, LP, Tape, etc.) is properly installed and cur-
rently running;
6. the connections are secure and there are no leads touching each
other. See the Installation section for details about connecting
your loudspeaker.
SONIC PROBLEMS
Make sure:
1. every transducer is currently working and that none of them
seems to make any abnormal noises;
2. all polarities are respected and that all cables are properly ins-
talled;
3. every transducer is properly sealed and that no air leak seems to
occur around the transducers while playing.
The sonic performance is closely related to your room inherent cha-
racteristics, your speaker positioning and your ancillary equipment. We
recommend that you experiment with these to find the best solution.
For help, contact your dealer or your Verity Audio service representa-
tive at (418) 682-9940 or email us at [email protected].
Customer Support
Verity Audio provides customer support and service for all Verity Au-
dio products. If you have any questions regarding your new loudspea-
ker, call the Verity Audio help desk at
(418) 682-9940
or email us at
. Help is available Monday through Friday
from 9:00 A.M. to 5:00 P.M. Eastern Standard Time (EST), except on
holidays.
If you seem to have an operational problem, try to solve it by referring
to the information in the Troubleshooting section. If you cannot qui-
ckly resume normal operation, contact your dealer or Verity’s expe-
rienced support personnel at the help desk.
OTELLO
Specifications
Bandwidth:
30 Hz to 50 kHz @ 3.0 dB
Woofer:
2 x 7-inch Edge coated Reed paper-pulp cone
Midrange:
5 inch doped polypropylene cone
2-inch SD voice coil
Tweeter:
1-inch neo-ring dome
Power handling:
100 watts music power
Sensitivity:
93 dB @ 1w @ 1 m
Nominal impedance:
8 ohms
Minimum impedance:
3.8 ohms
Break in time:
75 hours (63%), 400 hours (99%)
Dimensions & Weights
Height:
43.6 in. (107.3 cm)
Width:
10.9 in. (27.6 cm)
Depth:
18.6 in. (47.2 cm)
Weight:
150 lbs (75 kg) / pair
Gross weight:
190 lbs (86 kg) / pair
Features
Connectors:
Pure Silver • Five ways
«MASI» Isolation Base
Included
Available finishes
Standard
High gloss black, white
Special Order
Makore High Gloss
