Connector Bolts
Table Top
Mounting
Plate
Fence
T-Bolts
Flat
Washers
Knobs
1
/
8
"
Hex
Key
Levelling Screws
1
/
8
"
Hex Key
Machine Screw
1
/
2
"
1
/
2
"
1
/
2
"
1
/
2
"
4× Ø
3
/
16
"
THRU
Ø
7
/
16
"
4
"
4
"
Insert Plate
Veritas Tools Inc. Ottawa ON K2H 1C2 Canada veritastools.com
© Veritas Tools Inc. 2020
360 INS-754_A
Attaching Table Top to
Mounting Plate
Position the table top on the mounting
plate and secure with four connector
bolts using the 4 mm hex key.
Insert Plate
The 4
"
× 4
"
insert plate helps to prevent
blow out in the back of a workpiece.
As the insert gets consumed, it can be
rotated to three additional positions.
Replacement insert plates can be made
from
1
/
4
"
thick plywood or MDF.
Levelling the Insert Plate
1. Loosen the machine screw using the
1
/
8
"
hex key.
2. Adjust the four levelling screws with
the hex key, one corner at a time, as
required to bring the insert plate flush
with the laminate surface.
3.
Once the insert plate is flush
with the top, lightly tighten the
machine screw.
Note:
The
1
/
8
" hex key is stored in a
pocket just below the front edge of the
top. A magnet at the bottom of the pocket
keeps the hex key in place.
Installing the Fence
Secure the optional fence assembly
onto the drill-press table top using two
T-bolts, two fl at washers and two knobs,
as shown.
