Network > SetProperty
Network > SetProperty
– Set the Ethernet interface property.
SYNOPSIS
SetProperty
InterfaceName Property Value
DESCRIPTION
You can use this command to set Ethernet interface property. You can define the
name of the device, the property name such as an MTU. And you can define the
property value, such as 1500 for the MTU.
OPTIONS
SetProperty
InterfaceName Property Value
Set Ethernet interface property.
Enter the name of the interface name in the
InterfaceName
variable. An example
of this value is
eth1
. The
Property
variable is the property name, such as
mtu
.
The
Value
variable is the property value, for example 1500.
The following is sample entry for this command:
SetProperty eth1 mtu 1500
This command changes the Maximum transmission unit (MTU) of interface
(eth1) to 1500.
42
Main > Network
Network > SetProperty
Содержание Access 3340
