Table 1-7
Veritas 5250 Appliance rear panel features and connectors
Function
Number
Power Supply 1 and Power Supply 2 - Dual, redundant, and hot-swappable
power supply modules
1,2
DB-15 VGA monitor connector
3
Serial port - Serial connection for Veritas Technical Support use only
4
Three stacked USB 3.0 Type A serial ports for general use
5
IPMI port - An external RJ45 port used for appliance remote management
purposes
6
eth0/NIC1/host1
■
NetBackup Appliance (eth0/NIC1):
Used for the initial configuration of the appliance. After completing the initial
configuration, you can connect NIC1 (eth0) to an administrative network that
does not provide any backup data transfer. For more information, see the
NetBackup™ 52xx Appliance Initial Configuration Guide
.
Note:
Veritas does not support forming a NIC bond using eth0/NIC1 with
other eth/NIC ports.
7
eth1/NIC2/host0
■
NetBackup Appliance (eth1/NIC2):
A 1-GbE port for general use.
8
eth2/NIC3/privnic1
■
NetBackup Appliance (eth2/NIC3):
A 1-GbE port for general use.
9
eth3/NIC4/privnic0
■
NetBackup Appliance (eth3/NIC4):
A 1-GbE port for general use.
10
PCIe riser assembly 1 *
11
PCIe riser assembly 2 *
12
PCIe riser assembly 3 *
Contains two half height PCIe slots.
Note:
PCIe riser assembly 2 and riser assembly 3 are riveted together. As a
result, riser assembly 2 and riser assembly 3 are removed as one unit.
13
20
About the Veritas 5250 Appliance
About the 5250 Appliance rear panel
