Instructions
It is important that the fence be held firmly against the face of the workpiece
being planed in order to get accurate results. This ensures that the fence will
govern the plane’s orientation, not the sole. Press the fence firmly against the
workpiece with your forward hand and push the plane with your other hand.
Angles other than 90°
Bevel angles other than 90° can be achieved by attaching a bevelled piece of
wood to the fence using #10 flat-head screws through the countersunk holes.
Veritas Tools Inc. Ottawa ON K2H 1C2 Canada veritastools.com
© Veritas Tools Inc. 2018
677 INS-272_C
Figure 4: Fence held firmly against workpiece.
Figure 5: Attaching bevelled piece of wood to inside of fence to shoot
bevelled edges.
Bevelled Strip
of Wood
#10 Flat-Head Wood Screws
