Figure 2: Installing the fence onto the plane.
Rear Locking Knob
Figure 3: Installing the front locking knob into the fence.
Front Locking
Knob
2
3. Slide the front locking knob into the fence slot until it contacts the wing of the plane
and tighten.
4. Lock the front knob in position using a large slot screwdriver.
Setting the Angle
The fence can be set for square or any angle through 45° to either side (45° through 135°).
Loosen the locking lever and pivot the fence to the desired angle, using a square, miter
or set-up piece as your guide, then tighten the locking lever. After setting the angle, you
can rotate the locking lever out of the way, if necessary.
