2
Installation
The Veritas Jointer Fence quickly and securely attaches to your plane through
the use of powerful rare-earth magnets. Simply bring the fence up to the side
of the plane until the step in the fence makes contact with the sole of your
plane, then pull back on the fence until the stop engages the plane wing. Check
that the stop is in the correct position by ensuring that both magnets are in
contact with the side of the plane.
Instructions
It is important that the fence be held fi rmly against the face of the workpiece
being planed in order to get accurate results. This ensures that the fence will
govern the plane’s orientation, not the sole. Press the fence fi rmly
against
the workpiece
with your forward hand and push
the plane with your other hand.
Note:
Should
the fence move in relation to the plane, it
means that you are pushing forward on
the fence and not just holding it against
the workpiece.
Figure 3: Fence held firmly against workpiece.
Figure 2: Installation.