Top
Plate
Levelling Screw
Figure 2: Adjusting the levelling screws.
Veritas Tools Inc. Ottawa ON K2H 1C2 Canada veritastools.com
© Veritas Tools Inc. 2019
974 INS-743_A
3. Secure the base plate to the table top with the two anchor screws
(10-32 ×
1
/
2
"
flat-head screws).
Tip:
This step is optional, but having the base plate secured to the table
top lets you move the top and compact router set-up as one unit.
4. For better control when freehand routing, install the pivot post (or starter pin)
on the infeed side, in place of the right-hand anchor screw.
Accessories
05J66.01
Base Plate for Bosch Colt
™
05J66.02
Base Plate for DeWalt
®
DWP611/Porter-Cable
®
450
05J66.03
Base Plate for Ridgid
®
2401
05J66.30
1
/
8
"
Insert
05J66.32
1
/
4
"
Insert
05J66.34
3
/
8
"
Insert
05J66.36
1
/
2
"
Insert
05J67.02
Base for Table Top for Compact Routers
05J67.05
Fence for Table Top for Compact Routers
Installation
1. Place the base plate in the machined opening.
2. Adjust the five levelling screws (from the underside of the table top) with
the included hex key, as required to bring the base plate flush with the
laminate surface.
