VeriSmart EcoHeat C11, Инструкция по установке и эксплуатации

Страница: 51 / 68

Num
.
Preset Values and options
01
: Types of Degrees on Screen
​
:
​
Celsius Degrees
​ : ​
Fahrenheit Degrees
02
Time selection
(24:00)
(12:00 AM (Antemeridian) / PM (Post meridian)
03
: Automatic summer ⬄ winter time change
​ : ​
The time will change automatically.
​ : ​ The time must be changed manually.
* You must correctly set the date for this to work.
04
: Internal Probe Calibration
The calibration cannot be completed until the radiator has
been in operation for a minimum of 1 day.
Place a thermometer in the middle of the room at
approximately 1.5 m from the ground. After one hour, take
note of the temperature.
When entering the calibration menu, the value measured by
the radiator is shown.
Now insert the value measured with your thermometer by
means of keys
​
(­)
​
and
​
(+)
​
, confirm your measurement with
(
​ OK ​
) to save the value.
Press ( ​ OK ​ ) again to view the difference added to the
temperature value.
* Important note:
When calibrating the room temperature
​
ONLY the radiators
should be used for heating the room.
05
: Minimum Temperature:
This menu allows setting the minimum temperature used for
the “Frost Protection” mode.
The default value of this setting is
​
5.0
​
°C
Use the keys
​ (­) ​
and
​ (+)
to change the value and confirm its
setting by pressing ​ (OK) ​ .
Rev.1_09-07-15 Page 26