Installation In struc tions
Hawkeye 8051/8053
PULSE OUTPUT kWH TRANSDUCERS
OPERATION
The H-8000 Series combines a microprocessor based kWh transducer and high ac-
curacy split-core in stru ment grade current transformers (CTs) in a single unit. Because
the electronics are integral to the CT(s), hard ware and installation costs are greatly
reduced. Split-core design eliminates the need to remove conductors.
local or remote
electrical metering
and submetering
in commercial
buildings!
P/N Z101659-0D
10831 S.W. CASCADE BLVD.
PORTLAND, OREGON 97223
(503) 598-4564 FAX (503) 598-4664
1-800-354-8556
VERIS INDUSTRIES
http://www.veris.com email:[email protected]
®
Applications
Tenant submetering for commercial tenants
Energy management & performance contracting
Departmental costing in manufacturing facilities
Cooling plant optimization
Easy cost-eff ective installation
Precision transducer electronics and high accuracy instrument grade CT's in a single
easy to install package...reduces the num ber of installed com po nents
Unique split-core design eliminates the need to remove conductors
Fits easily into distribution panels...lowest total installed cost
Automatically detects phase reversal...eliminates the need to be concerned with CT load
orientation
Economical single-CT version available for balanced loads (H8051)
High accuracy and resolution
± 1% accuracy conforms to ANSI C12.1 metering standards (H8053)
0.1 to 1.0 kWH/pulse selectable
• This product is not intended for life or safety applications
• Potential electrocution hazard exists. Installing sen sors in an en er gized electrical
enclosure or on any en er gized con duc tor can be haz ard ous.
• Read instructions thoroughly prior to install
Severe injury or death can result from electrical shock during contact with high
voltage conductors or related equip ment. Dis con nect and lock-out all power
sources during installation and service. Applications shown are sug gest ed means
of installing sensors, but it is the re spon si bil i ty of the installer to ensure that the
in stal la tion is in com pli ance with all national and local codes. In stal la tion should
be at tempt ed only by in di vid u als familiar with codes, stan dards, and proper safety
pro ce dures for high-voltage installations.
WARNING--REFER SERVICING TO
QUALIFIED PER SON NEL ONLY!
