Verint RP 400 Series, Монтаж и эксплуатация

Страница: 10 / 16

Appendix
Technical Data RP 406K (–IC)
CCD Sensor 1/3“ Sony Exview Interline CCD
Max. pixels (h x v) 768 x 576
Horizontal resolution 470 TV lines
Sensitivity 0.015 lux on sensor / 0.3 lux with F2.0
TV standard PAL, 625 lines
Enhancer Yes
Gamma correction 0,45
Electronic shutter Automatic, 1/50 -1/100,000 sec.
Signal-to-noise ratio 50 dB (AGC off)
AGC 30 dB
Synchronization Internal
Backlight Automatic
Spectral response 380 -660 nm
Smear effect 0,005%
Video output signal FBAS 1Vss / 75 Ohm, BNC
Operating voltage 12V/DC (DC 8,0 -15.0 V)
Performance Max. 2 W
Operating temperature -10° to +50°C
Extended temperature area according to
EN501155-T1 -25° to +70°C
Humidity 90 % (not condensed)
Protective system according to association
German electrotechnicians (VDE) IP41, class III
MTBF 80,000 hours
Housing shape Mini dome camera (black)
Connections Connecting cables with open cable ends (12VDC) / BNC
plugs (video)
Weight Approx. 300 g
Installation RP 406K: Wall/ceiling mounting
RP 406K-IC: Wall/ceiling installation
Lens RP 406K: 2.9mm; 3.6mm; 4.3mm, 6mm; 8mm
RP 406K-IC: 4.3mm
Dimensions (diameter / height) RP 406K: 79 mm / 56.5 mm
RP 406K – IC: 79 mm / 62 mm
Extended product standards EN 50155
"e" mark
EN 50121-3-2
DIN 5510
10