f)
Fit Log “F” into position at right hand side of centre of the fuel-bed base
log “A”as shown below in Fig. 22, using the groove in Log “A” as a
guide for placement.
Fig. 22
g)
Fit Log “G” into position at right hand side of the fuel-bed base log “A”as
shown below in Fig. 23, using the raised section in the base log as a
guide for position.
Fig. 23
Warning : Use only the logs supplied with the fire. When replacing the
logs remove the old logs and discard them. Fit a complete set of logs of the
correct type. Do not fit additional logs or any logs other than a genuine
replacement set.
53
F
G
