Verilux CleanWave, Инструкция по эксплуатации

Страница: 10 / 15

10
Cleaning the Inlet
If the inlet is blocked by dust, completely remove the foreign materials – after fi rst
turning the vacuum OFF.
A blocked inlet may result in weakened suction and noise. If the inlet is blocked,
there is also a risk of damage or malfunction caused by overheating.
Care and Maintenance
Figure 3
Figure 4
Emptying Dust Container and
Cleaning Filters
1. Disconnect the cleaner from the base
section by pressing the release lever
at the rear of the cleaner and lifting
up.
2. Press the dust container lock button
to release the dust container from the
vacuum. (See Figure 3)
3. Carefully pull the fi lter assembly
outward and remove.
4. Empty the container. (See Figure 4)
5. Unlock the outer fi lter by twisting it
slightly to the right (clockwise).
6. Remove the outer fi lter by pulling it
away from the main casing.
7. Pull the inner fi lter out to remove.
8. The fi lters should be cleaned every
time the dust container is emptied by
tapping them on the side of the bin to
release trapped dust.
9. Wash both fi lters in lukewarm water
on a regular basis.
10. Make sure the fi lters are completely
dry before reassembly.
11. Reassemble in the reverse order.