![Verilux CleanWave VH03 Скачать руководство пользователя страница 4](http://html1.mh-extra.com/html/verilux/cleanwave-vh03/cleanwave-vh03_instruction-manual_1004405004.webp)
6
7
1 Foot
10 Seconds
Guidelines for Use
The CleanWave
®
Sanitizing Wand kills up to 99.9% of germs and odor-causing
bacteria on hard surfaces
‡
while at home or away, such as:
Remote controls
Computer keyboards
Baby changing stations
Toys
Faucets
Telephone handsets
Doorknobs
Light switches
Steering wheels
Shopping cart handles
Airplane and train headrests
†
Alarm clocks
Cell phones
Music players
Sanitizing Wand Troubleshooting
The Wand Will Not Turn On
• Be sure the Wand is horizontal, with the bulb facing downward.
• Open battery compartment and remove batteries. Wait at least two
seconds. Replace batteries. Try again.
If you continue to have trouble, please call our Customer Service line at
1-800-786-6850.
This product should never be handled or used by children
to prevent accidental exposure to UV-C rays.
Technical Specifications
Environment
Operating Temperature: 15°C to 35°C (59°F to 95°F)
Storage Temperature: 0°C to 40°C (32°F to 104°F)
Relative Humidity: 5% to 95% non-condensing
UV-C Bulb
3 Watt UV-C bulb; non-replaceable
Battery
4 standard AA batteries (not included)
Sanitizing Wand Operation
To operate your Verilux
®
CleanWave
®
Sanitizing Wand:
1.
While holding the Wand with bulb facing down and away from skin or eyes,
press the large blue button for 3 seconds (green light will flash).
2.
Begin sanitizing by holding the Wand
as close as possible
and no more
than one-half inch above the surface and move Wand slowly side to side
in a 12" (1 foot) area. UV-C effectiveness depends on direct exposure,
duration and intensity. Place the wand as close to the object as possible,
preferably within 1/2 inch. (see illustration below).
3.
To turn the Wand off, press the blue button until the green light goes out.
4.
Remove batteries when not in use to extend battery life.
Note:
A safety switch will automatically turn off the Wand if the light source is
turned upward (it will go back on when the light source is once again turned
downward).
After 10 minutes of continuous operation the unit will shut down —
simply restart Wand if additional use is required.
Low Battery Indication
When the battery is low and needs replacing, the Wand will beep 10 times
and the LED will flash 10 times.
*Calculation based on eliminating 99.9% of Influenza A on standardized size items.
† Sanitizing times and effectiveness for porous surfaces will vary.
‡Based on exposure of UV-C light to test organisms in laboratory on non-porous hard surface, under
controlled conditions.
§When used as directed.
WARNING: