Verilink WANsuite 6450, Справочное руководство

Страница: 74 / 205

3-46 W A N s u i t e 6 4 5 0
Trap Log
A trap is a mechanism that permits a device to send an alarm for certain
network events to an SNMP management station. The Trap Log screen
(Figure 3.39) shows all generated traps.
The table shown in this screen lists each trap by its Index number, and
displays the type of error captured by the trap (Trap Number) and the date
and time that the trap was stored (Time Stamp).
Click the hyperlink at the top of the screen to display the latest trap
information in the table. To remove all trap information stored in memory,
click the “Delete All Traps” button at the bottom of the screen (not shown in
the figure below).
Figure 3.39 Trap Log Screen
Top Talkers
Clicking on the “Top Talkers” link in the navigation tree displays a screen
(Figure 3.40) used to set the parameters for and initiate the generation of a list
of IP Addresses ranked in terms of the number of frames and octets they have
transmitted during a specified reporting period. This report allows MIS
managers to determine who is generating the most traffic on a WAN based on
IP Addresses.