VeriFone VX 520 3G, Руководство по установке

Страница: 23 / 48

T
ERMINAL
S
ETUP
Connecting Optional Devices
VX 520 3G I
NSTALLATION
G
UIDE
23
V
E R
I
F
O
N E
C
O
N F
I D
E N
T I
A
L
TE
M
PL
ATE
R
EV
F
3
After removing the battery, you will see the SIM compartment.
4
Insert the SIM card into the cardholder.
Figure 12 Inserting SIM Card
Connecting
Optional
Devices
The VX 520 3G terminal supports some peripheral devices designed for use with
electronic point-of-sale terminals.
Different terminals support different devices, so for more information about
optional devices, please contact your VeriFone distributor.
Optional Device
Connections
The VX 520 3G terminal has a port that can operate either as a PIN pad port or an
RS-232 port, depending on the power source available.
Connecting the
PIN Pad or Smart
Card Reader
to the
VX 520 3G
Use the following procedures to connect a PIN pad or smart card reader.
1
Remove the VX 520 3G terminal rear cover. (See Figure 9 )
NOTE
Before inserting the SIM card, position it as shown in Figure 12 , with the card’s
gold contacts facing up. The cardholder connector base has an image
resembling the notched corner of a SIM card to ensure the card is positioned
correctly.
%4(
23
3)- 3)- 3)-
A B C
CAUTION
Before connecting any peripheral device, remove the power cord from the
terminal. Reconnect the power cord only after you are finished connecting the
peripheral device(s). For complete information about peripheral installation and
use, refer to the user documentation supplied with those devices.
NOTE
When the VX 520 3G terminal is powered via the corded power supply, the
terminal provides 9.3V DC, 4.0A. This power will drive most VeriFone
accessories. Contact your local VeriFone representative for more information.