S
ETUP
Mounting the Device
UX700 I
NSTALLATION
G
UIDE
17
Disconnecting
Cables
To disconnect cables, use the same steps described above in reverse. If
exchanging cables, use Verifone-approved cables. See
for cable part numbers and ordering information.
Mounting the
Device
Use the following procedure to mount the UX700 to a suitable mounting surface.
To mount the unit
Align the UX700 stud holes with the holes on the mounting surface.
NOTE
These switches should be used only by the authorised service centers.
CAUTION
Ensure the mounting frame has a thickness between 2mm and 14mm.
