VeriFone Omni 3210, Руководство по установке, Страница: 13 / 43

13
Omni 3210 Installation Guide
The first serial port is identified by the
“RS232” icon shown to the right. You use the
RS232 port to connect a VeriFone CR 600
check reader, or a similar type of serial device.
The second serial port is identified by “Bar
Code” and “PIN Pad” icons, shown to the
right. You use the
Bar Code/PIN Pad port to
connect a PIN pad, smart card reader/writer, or
bar code wand.
Power Pin Connector Port
• On the lower right-hand side of the back of the
terminal is a port for connecting the terminal to
a power source. The
Power port is identified
by the “electrical power” icon shown to the
right.
Step 4: Connect the Terminal to a Telephone Line
You can connect the Omni 3210 to a telephone line in one of
two ways — direct or pass-through. The relative advantages
and disadvantages of these two types of telephone connections
are described below.
About Direct Telephone Line Connections
With a direct telephone line connection, a single telephone line
cord connects the Telco port on the back of the terminal
directly to a nearby RJ-11 type modular telephone company
wall jack (see Figure 8). A direct connection is usually
preferred because telephone line usage is dedicated to the
terminal, making it possible to perform an electronic
transaction at any time.