Installation
◆
7
1.
Insert the Power Cable connector into the Multicable jack
labeled POWER.
Note:
Use a locally available cable tie to secure the Power
Cable jack to the Multicable connector as shown in
the diagram on page 1. This configuration maintains
the integrity of the connection and provides additional
connection security.
Warning:
When the optional Power Supply is plugged into the
AC power outlet, voltage is immediately available to
the VeriFone Indoor VeriPASS Terminal. Avoid
handling the exposed power cable connector.
Note:
The AC power outlet should be easily accessible
should the user desire quick power disconnect.
2.
Connect the Power Supply to the AC power outlet or
appropriately configured power connector.
3.
Verify the customer display is activated.
4.
Verify the logo illuminates momentarily when power is
applied.
5.
Verify the display is illuminated and the display is
activated.
Warning:
To turn off your VeriFone Indoor VeriPASS Terminal,
always unplug the power supply from the AC power
outlet first. This eliminates the presence of voltage at
the Multicable power receptacle and the potential
shock hazard.
Содержание Indoor VeriPASS
