Veridian Healthcare 11-50D, Инструкция по эксплуатации

Страница: 9 / 28

USING YOUR PULSE OX FIT
ENGLISH • 9
3. Press the power button to turn the unit on. The screen will briefly flash a test
display, and then begin the measurement.
%Sp0
2
95
84
PR
bpm
Oxygen
Saturation
4. Solid dashes (– – –) will appear on the display for a few seconds, then the
display will begin to show the oxygen saturation (SpO
2
) and pulse rate (PR
bpm) measurements.
Take care to not move excessively during monitoring. These are active readings
and may fluctuate slightly as you observe the display, responding to your heart
rate (bps) and other factors.
5. The Pulse Ox Fit should only be used for spot-checking blood oxygen
saturation and pulse rate and should not remain on the finger for more than a
few minutes at a time.
6. Remove the unit from the finger. The unit will automatically turn off after 5
seconds.
7. Clean the unit as directed before storage.
Pulse Rate
98
77
%Sp0
2
PR
bpm
Oxygen
Saturation
Pulse Rate
SpO2% Waveform Pulse Bar Graph
Low
Battery
Symbol