Veria Control B35, Руководство по установке

Страница: 4 / 8

- 6 - - 7 -
2. Mounting Instructions
Please follow the below guidelines when installng the ther -
mostat
Place the thermostat at a suit -
able height on the wall (typi -
cally 80-170cm)
In wet rooms, place the thermo -
stat according to local regula -
tion on IP classes.
Plaats de thermostaat niet aan
de binnenzijde van een buiten
-
muur.
A floor sensor enables a more ac -
curate temperature control and is
recommended in all floor heating
applications and mandatory un
-
der wooden floors to reduce the
risk of over-heating the floor.
•
Place the floor sensor in a
conduit in an appropriate
place where it is not ex
-
posed to sunlight or draft
from door openings.
• Equally distant and >2cm
from two heating cables.
• The conduit should be
flush with the floor surf
-
ace - countersink the con -
duit if necessary.
• Route the conduit to the
connection box.
• The bending radius of
the conduit must be min
50mm.
Avoid placing the thermostat in
direct sunlight
2. Mounting Instructions 2. Mounting Instructions