Verhagen Leiden V-move S, Руководство пользователя

Страница: 16 / 19

Verhagen Leiden B.V.
|
Hoge Rijndijk 267
|
2314 AG Leiden
|
T: +31 (0)71 581 30 30
|
F: +31(0)71 541 61 89
15
info@verhagenleiden.nl
|
www.verhagenleiden.nl
6.
Maintenance
Follow all instructions as described in this manual, in particular section 2 on safety.
The V-move® S may only be moved by driving under its own force or lifting using a fork-lift truck.
Towing causes serious damage to the drive gear.
Maintenance of the V-move® S must be carried out by qualified personnel while respecting the
warnings on the V-move® S and according to the user manual.
Before you remove the batteries, always shut off all current consumers because of spark
formation.
The batteries are filled with acid and sealed. They are fully enclosed and maintenance-free.
Distilled water can and may not be added.
Battery fluid is a corrosive acid. Avoid contact with clothing, skin and eyes.
Immediately wash off any splashes of battery acid on clothing or the skin with soap and water,
then rinse with copious amounts of water. Rinse acid splashes in the eyes for at least 5 minutes
with clean water and immediately see a doctor.
6.1
Preventive maintenance
The V-move® S is lubricated, set and has been test run at your supplier.
Normal usage is assumed for the following maintenance instructions. For intensive use or use in
extreme conditions, the maintenance must be performed at shorter intervals.
Item Once
every Remarks
Batteries Day Check the battery voltage using the battery indicator.
V-move® S Day The V-move® S must turn smoothly to the left and the right without
juddering.
V-move® S Day Check for external damage or faults.
Driven tyres Week Check for wear of the driven tyres. If the wheels skid on sudden
braking, they must be replaced.
Signs Week Check their legibility and replace if necessary.
Maximum speed It must be possible to reach the maximum speed with gentle
acceleration. If this is not the case, contact Verhagen Leiden BV.
Lubrication Year Lubricate grease nipples on bearings, drive wheels and castors.
Bolts, turning points,
hinge points
½ year Check that all bolts are still tight and check the turning and hinge
points and guides for wear and clearance.
Cleaning
Year See section 5.11