VERDER CARBOLITE GERO CAF G5, Инструкции по установке, эксплуатации и обслуживанию

Страница: 29 / 88

Window Zoom
The image can be manipulated in the sample window by the controls in the lower right
hand side of the sample window. The image can be zoomed in and out with the + and -
buttons.
Note : the image can also be zoomed by double clicking a position in the
sample window (this must be outside the sample grid area). To return to the original
image size select the 'Fit Window' Button.
Command Selection
The software can be navigated using the 'Text Menu' or the 'Graphic Toolbar' or
primarily the 'Process Tabs'.
Graphic Toolbar
The 'Graphic Toolbar' is shown by default but can be hidden if not required by selecting
from the text menu, Tools - Tool Bars - Show/ Hide.
Connection Status
The bottom left of the software screen is the connection status indicators for the
camera and the controller. Green indicates connected, red indicates disconnected.
4.7.1 Process Tabs
The CAF test software has been designed to maximise operator work flow by the use of
process tabs along the top of the command window on the left hand side of the screen.
The Tabs will guide you through three areas of operation:
Configure Setting up the test operating parameters
Test
Defining the test name, starting the test and selecting
analysis type.
Analysis Reviewing the test data analysing and storing the results
29