VERDEGRO Blade, Руководство по эксплуатации и обслуживанию

Страница: 40 / 68

Page 40 of 68
Operation and maintenance manual Verdegro Blade
6.3 Performance criteria
A. The Verdegro Blade TMA , when mounted to a truck minimum total weight of
16.010 lbs. (7.262 kg ) and a maximum weight of
22.120 lbs. (10.033 kg) situated
on clean dry pavement with the transmission in second gear and parking brakes
activated shall perform as follows:
1) Vehicles with a mass of 1100 kg (impacting straight into the rear of the Blade
at 100 kph shall remain upright with the theoretical occupant impact velocity
of 12 m/s or less and the occupant ride down acceleration of 20,49 g's or less
per MASH, Test 3-50 evaluation criteria.
2) Vehicles with a mass of 2270 kg impacting straight into the rear of the Blade at
100 kph shall remain upright with the theoretical occupant impact velocity of
12 m/s or less, and the occupant ride down acceleration of 20,49 g's or less
per MASH, Test 3-51 evaluation criteria.
3) Vehicles with a mass of 2270 kg impacting straight into the rear of the Blade at
100 kph, and an offset of W/3 with respect to the Blade centerline, shall
remain upright with no significant roll pitch or yaw per MASH Test 3-52
evaluation criteria.
4) Vehicles with a mass of 2270 kg impacting at 10 degrees into the rear of the
Blade at 100 kph (62 mph) and an offset of W/4 at an angle of 10 degrees with
respect to the Blade centerline, shall remain upright with the theoretical
occupant impact velocity of 12 m/s or less and the occupant ride down
acceleration of 20,49 g's or less per MASH, Test 3-53 evaluation criteria.
5) Certified test results and associated test reports and films produced in the
guideline with MASH procedures shall be submitted showing that the Blade
system conforms with all test and performance criteria in this specification.
The Verdegro Blade TMA evaluation report is available on special request
B. The Verdegro Blade TMA shall successfully perform to normal accelerated
vibration, moisture and corrosion.