Mounting options
1. Mounting on suction cup
a. Unscrew angle pivot knob from car charger. Put it over the ball joint adapter.
b. Insert the ball into the socket of the charger in the back.
c. Tighten the angle pivot knob.
2. Mounting on a. Windscreen or b. Dashboard with suction cup
b.
a.
3. Adjusting the telescopic support pole
By turning the pivot knob (5), the telescopic support pole (6) can be moved up/down.
To fix the position, please tighten the pivot knob (5).
By turning the telescopic knob (7), the telescopic support pole (6) can be extended.
To fix the position please tighten the telescopic knob (7).
270° rotation
6
7
b.
a.
c.
a.
b.
5
6
a.
b.
Please clean the mounting area, lift the lever, push the suction cup firmly against the
windscreen and press the lever to lock.
Find a flat surface and clean the area, lift the lever, push firmly against the dashboard and
press the lever to lock.
a.
b.
Before use of the suction cup holder please peel off the protective paper film off the suction cup.
3
4
